Welcome to the official website of Taixing Smelting Plant Co., Ltd.!Contact us | Online
Taixing Smelting Plant Co., Ltd.

泰興冶煉廠有限公司

Taixing Smelting Plant Co., Ltd.

Drafting unit of "Industrial Cuprous Oxide", "Industrial Basic Copper Carbonate"...

The high-end production base of cuprous oxide and high-purity basic copper...

keywords: Cuprous oxide, Electrolytic cuprous, Basic cupric carbonate, Copper oxide, Copper (II) sulfate anhydrous

Products

Raw material (electrolytic copper)
Product description

Raw material supplier: Zhangjiagang United Copper Co., Ltd.
Electrolytic copper: blister copper (99% copper) is preliminarily made into a thick plate as an anode, pure copper is used as a thin plate as a cathode, and a mixture of sulfuric acid and copper sulfate is used as an electrolyte. After energization, copper dissolves from the anode into copper ions (Cu) and moves toward the cathode. After reaching the cathode, electrons are obtained and pure copper (also called electrolytic copper) is precipitated at the cathode. Impurities in blister copper, such as iron and zinc, which are more active than copper, dissolve into ions (Zn and Fe) along with copper. Since these ions are less likely to precipitate than copper ions, it is possible to prevent these ions from being deposited on the cathode by appropriately adjusting the potential difference during electrolysis. Impurities such as gold and silver, which are inactive than copper, are deposited at the bottom of the electrolytic cell. The copper plate produced in this way, called "electrolytic copper", is of high quality and can be used to make the company's products.

Product pictures

BACK
Copyright(C)2018, Taixing Smelting Plant Co., Ltd. All Rights Reserved. Supported by ChinaChemNet ChemNet Toocle Copyright Notice 備案序號:蘇ICP備10006952號-2

BACK
TOP

 
點擊這里給我發消息
技術咨詢
點擊這里給我發消息
銷售咨詢
 
 
 
 
少妇在山里被老头吃奶